Automatic leaf lard pullers  
   

MLP 6014

  
    MLP 6055  
  MLP 6064  
   

High capacity splitting machines equipped with saw or knives

  
   

MFP 6041

  
    MSP 6040  
   

MSP 6062

  
    Automatic machines for sows and boars  
    MSC 6063  
    Automatic knife-equipped splitting machines  
   

MFP 6083

  
   

MFP 6051

  
   

MFP 6085

  
    MFP 6059  
    MFP 6092  
    Automatic splitting saw machines  
    MSP 6083  
    MSP 6050  
    MSP 6059  
    MSP 6095  
    Automatic calf knife-equipped splitting machines  
    MFV 6025  
    Automatic head dropping machines  
   

MDT 6053

  
    MDT 6045  
    Ec and traceability stamping machines  
    MTP 6056  
    MTP 6060  
    MCS 700   
    Sharpening machines  
    MAC 6005  

 

 

Automatic splitting saw machine
 

MSP 6040 (High capacity model)
   

Hog
slaughtering
line drawing
  Singeing machine
  Polishing
  MDT
  Evisceration
  MLP
  MFP-MSP-MSC
  Veterinary inspection
  MLP
  Weighing Classification
  MCS




Possible applications

 • This machine is equipped with the carcass gripping arm system located on the other side of the conveyor than the main part of the machine. The use of this technical concept allows the machine to reach a hourly capacity of 40% better than the previous generation of machines.

Besides, the room necessary for splitting on a slaughtering line is reduced from between 30 to 50%.

This machine is equipped with a circular sawing head specially designed for this application.

It is fully automatic and does not require any operator. It cuts down significantly on manpower.
This machine guarantees a regular production quality and a carcass presentation similar to the hand split with cleaver.
It also eliminates all risk of cross-contamination.

• Capacity:

The maximum production capacity for 1 machine is 650 carcasses / hour.
To increase the capacity, it is possible to install several units in series on the same line: up to 1300 carcasses / hour by synchronising 2 units.

• Construction:

The structure and the covering of the machine are stainless steel.
All mechanised movements are controlled by frequency variator or servo-motor.
The construction is simple and sturdy to make cleaning and maintenance easier.



• Fitting conditions and application type:

This machine does not depend on the carcass-conveying system allowing it to be installed with any kind of conveyor whoever the manufacturer is.

It is an adaptable machine that can perform every possible kind of carcass splitting.

• For a particular application, please fill in our technical questionnaire on the hot line page or consult our sales department.